Invisible Sealer


Category: SKU: SE-001 Tag:


Invisible Sealer is an invisible clear silicone sealer that will maintain the natural look of the tile. Invisible Sealer may be used on LOW POROSITY tiles only (e.g. low porosity terracotta, granite, marble and porcelain), and will repel water and most oils. Invisible Sealer is suitable for interior and exterior applications. Invisible Sealer penetrates into the tile and therefore maintains the slip factor of the tile.

Available in Quarts and Gallons

Test for desired results in an inconspicuous area before continuing the application. This product is flammable. Keep away from open flames and sources of ignition.

  • Read all instructions and tips before the application so that you can plan the application correctly.
  • Mask off any adjacent surfaces that need to be protected during the application.
  • Ensure that the tile is clean and free from all residues, detergents, grout, cement, oil wax and other stains. (prepare with the correct Tile & Floor Care products).
  • Ensure that the tile is totally dry before applying the sealer (if unsure wait ±48 hours after cleaning).
  • Shake or stir well before use.
  • Using a suitable applicator, apply a thick, even coat of Invisible Sealer. BUFF ANY EXESS SEALER FROM THE SURFACE AFTER 5 MINUTES. Use a clean terry/mutton cloth or paper toweling.
  • Wait for the sealer to dry for ±2 hours.
  • After 2 hours test to determine if surface is totally sealed by applying water droplets to the surface. If water is absorbed (tile darkens), apply an additional coat. Wait 2 hours and repeat test.
  • Apply coats as determined by the rule above if necessary.
  • Allow to dry before trafficking. (±2 hours). Cure time is 48 hours.
  • Clean applicator tools with turps/mineral spirits after each use.

Spanish Instructions


Data Sheet