Seal & Boost Matte



Seal & Boost Matte is a tried and tested solvent based sealer system for natural stone and cement tiles. It is very simple to use and is suitable for most types of natural porous tiles. Seal & Boost Matte’s refined non-yellowing resin formula, is designed, for ease of application, protection offered and cost effectiveness. Seal & Boost Matte is both an impregnating and surface sealer so its color enhances the tile and provides a beautiful sheen finish. Seal & Boost Matte is a breathable sealer. That means it may be applied to areas that have a slight hydrostatic pressure problem. Seal & Boost Matte dries quickly and cures quicker than most other un-accelerated sealers.

Available in Quarts and Gallons

Always test for desired results in an inconspicuous area before application.

This product is flammable. Keep away from open flames and sources of ignition.

  • Read all instructions and tips before the application so that you can plan the application correctly.
  • Mask off any adjacent surfaces that need to be protected during the application.
  • Shake or stir well before use
  • Ensure that surface is clean and free from grout, cement, oil, wax, and other stains. (Clean with the correct Tile & Floor Care product if necessary).
  • Ensure that the surface and grouting are uniformly dry before application. Wait 24 hours after washing before applying the sealer.
  • Using a suitable applicator apply an even coat of Seal & Boost Matte to the surface. Do not allow bubbles or pooling.
  • Allow to dry for 2 hours between coats, and then apply another (thin) coat. In most cases a minimum of 2 coats is necessary.
  • Apply more coats at 2 hour intervals (if required), until a uniform even finish is achieved.

Spanish Instructions


Data Sheet